After having done maintenance on your boat or if you fixed it because it was in a poor condition, you can be sure that your boat will be clean and polished for a long time.

But remember that your boat is being affected 24/7 for the corrosive properties of the sea and the sun’s ultraviolet rays. This causes the outer layer of the boat to rust and the texture will damage, so your boat can look bad and lose the value it had at the time you buy it or polished it.

There are some ways to maintain your boat clean and polish for more than the regular. There are products that serve as a protection for your boat and they could be water repellent, what is even better because they help to protect against both pollution and dirt adhesion.

We want to recommend you the Sea-Shield Nano Fresh, an excellent product that works perfect on most surfaces and is an excellent cleaner/protection booster spray for surfaces that have been coated by Sea-Shield® Nano Coating, Sea-Shield Glass Coating, Sea-Shield Exhaust Guard and Sea-Shield Cleaner Wax.

For more details and information about products to protect your boat go to http://www.sea-shield.com/ 

DESCRIPTION Sea-Shield ®Nano Coating is the longest lasting protection you can apply to your yacht or boat on a variety of surfaces including but not limited to paint, stainless steel, vinyl cushions, rubber, gel coat and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on and buff out the excess.

INSTRUCCTIONS Apply to a clean dry surface only. For best results apply to a properly prepared surface. This product is designed for hand application only using a microfiber sponge applicator. Mist the applicator (not the surface) with a single spray of Nano Coating . One spray is enough sealant to cover a surface area of 3 to 5 square feet. Apply a very thin coat to the entire surface rub in thoroughly until only a light film remains then wipe off all excess. Allow to dry 12 to 24 hours before getting wet. For additional protection apply Sea Shield Polymer Sealer after the Nano Coating is fully cured. .

DESCRIPTION Sea-Shield ®Nano Coating is the longest lasting protection you can apply to your yacht or boat on a variety of surfaces including but not limited to paint, stainless steel, vinyl cushions, rubber, gel coat and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on and buff out the excess.

INSTRUCCTIONS Apply to a clean dry surface only. For best results apply to a properly prepared surface. This product is designed for hand application only using a microfiber sponge applicator. Mist the applicator (not the surface) with a single spray of Nano Coating . One spray is enough sealant to cover a surface area of 3 to 5 square feet. Apply a very thin coat to the entire surface rub in thoroughly until only a light film remains then wipe off all excess. Allow to dry 12 to 24 hours before getting wet. For additional protection apply Sea Shield Polymer Sealer after the Nano Coating is fully cured. .

DESCRIPTION Sea-Shield ®Nano Coating is the longest lasting protection you can apply to your yacht or boat on a variety of surfaces including but not limited to paint, stainless steel, vinyl cushions, rubber, gel coat and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on and buff out the excess.

INSTRUCCTIONS Apply to a clean dry surface only. For best results apply to a properly prepared surface. This product is designed for hand application only using a microfiber sponge applicator. Mist the applicator (not the surface) with a single spray of Nano Coating . One spray is enough sealant to cover a surface area of 3 to 5 square feet. Apply a very thin coat to the entire surface rub in thoroughly until only a light film remains then wipe off all excess. Allow to dry 12 to 24 hours before getting wet. For additional protection apply Sea Shield Polymer Sealer after the Nano Coating is fully cured. .